Homepage  /  Technical Specifications
Group Properties
• The door frame is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• The door leaf is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• Door frame has an adjusment range of 17-25cm in accordance with wall thickness
• The Door leaf has embedded support bars of 30x40mm steel square tubing, horizontally and vertically, in order to increase the strength of protection against outside interference.
• Intervals of 1.2 mm strip steel plate is welded into the wing.
• 10 mm thick ULTRALAMINATE coated MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• The door leaf is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• The door frame is MDF-wood coated.
• Door frame has an adjusment range of 17-25cm in accordance with wall thickness
• The Door leaf has embedded support bars of 30x40mm steel square tubing, horizontally and vertically, in order to increase the strength of protection against outside interference.
• Intervals of 1.2 mm strip steel plate is welded into the wing.
• 10 mm thick LAMİNATE coated MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• The door leaf is made out of A1 quality DKP sheet with the thickness of 1.5 mm
• The door frame is MDF-wooden coated.
• Door frame is adjustable according to the wall thickness of 17-25 cm.
• Intervals of 1.2 mm strip steel plate is welded into the wing.
• The Door leaf has embedded, one-piece, 1.2 mm steel sheet, which covers all around in order to increase the strength against outside interference.
• 10 mm thick PVC coated or PAINTED MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made of A1 quality thickness 1.5 mm DKP sheet.
• The door wing is made of A1 quality thickness 1.2 mm DKP sheet.
• The outer side moldings is oval, the upper outer moldings is straight 90◦. Interior moldings is 45◦ motif.
• Door frame is adjustable according to the wall thickness of 17-25 cm.
• The Door wing is supported with as dimension 30x40 mm steel profiles horizontally and vertically. So, strength against outside interference is increased.
• Intervals of 1.2 mm strip steel plate is welded into the wing.
• DUAL COLOR LAMINOX coated MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made of A1 quality thickness 1.5 mm DKP sheet.
• The door wing is made of A1 quality thickness 1.2 mm DKP sheet.
• The outer side moldings is oval, the upper outer moldings is straight 90◦. Interior moldings is 45◦ motif.
• Door frame is adjustable according to the wall thickness of 17-25 cm.
• The Door wing is supported with as dimension 30x40 mm steel profiles horizontally and vertically. So, strength against outside interference is increased.
• Intervals of 1.2 mm strip steel plate is welded into the wing.
• CHROMED LAMINOX coated MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made of A1 quality thickness 1.2 mm DKP sheet.
• The door leaf is made of A1 quality thickness 1.2 mm DKP sheet.
• Interior and exterior moldings 45◦ motifs.
• Door frame is adjustable according to the wall thickness of 17-25 cm.
• The Door leaf is supported with as dimension 30x40 mm steel profiles horizontally and vertically. So, strength against outside interference is increased.
• Intervals of 1.2 mm strip steel plate is welded into the leaf.
• RUSTIC (CNC CARVED) LAMINOX coated MDF panels is used on door leaf front and behind.
• Noice and heat insulation is ensured by installing glasswool filling into the door leaf.
• At the door is used Monoblock locking system is controlled from two separate points.
• The door frame is made of A1 quality thickness 1.5 mm DKP sheet.
• The door wing is made of A1 quality thickness 1.5 mm DKP sheet and thicknes 60mm
• Door frame is adjustable according to the wall thickness of 17-25 cm.
• 1.5 mm sheet metal construction bent and records is used into wing. So, the door leaf is increased resistance to bending and shrinkage when exposed to heat.
• 6 cm thickness rockwool is used for heat insulation into the door leaf.
• At high temperature expanding EPDM Intumescent wick is used around the door frame and door leaf. So, the passage of smoke and flame is delayed.
• The door is painted with fire-resistant epoxy-polyester electrostatic powder coat.
• At the door, Panic Bar Lock System is used to ensure a fast and easy evacuation in case of fire.
• Specific sized and custom producing (1.5 wing, double wing, and so on) all kinds of fire exit doors, are produced in desired specifications.
• Optional side lighting pane opens and 6 mm thick, reinforced glass is attached.
Locks
Luxury Panel Steel Door Series
• Alphi Panel • Ultralam Panel • Laminate Panel • Embossed Panel
Panel Steel Door Series
• Rustic Panel • Color Laminox Panel • Chrome Laminox Panel • Rustic Laminox Panel
Classic & Special & Copper & Fire
• Classic & Special & Copper & Fire
All Rights Reserved. / Copyright© 2013 designed_by medyatör